 |
DP-CC918T |
Desire Power Car charger (DP-CC918T) with the following outstanding characteristics:
Features
Appearance:frosted type,UV smooth interface,rubber oil type
applicable model: Nokia/Motorola/Samsung/LG/Palm/HTC(Customized designs are available upon requests.)
It is compatible with all brands mobile phone,PDA,MP3/4,GPS etc.
Function
1.over-current over-voltage, over-load and over-temperature protection.
2.ouput-current vary from products by the intelligent control, will prolong the cycle life.
3.evironmentally friendly, energy-saving, complying with the safe certification standard.
4.hgh working efficiency: over 85%, good charging performance.
5.sronger performance, lower cost.
Parameters
Input voltage and current:12~24V/DC 1A
Output voltage and current:.5.0-6.5V/DC 0.2-1A
low non-load: Less than 0.3mA
Safe Certification
CE FCC CCC RoHS
Usage Guide:
1,Connect the charger with mobile phone till the LED indicator turns green.
2,Plug the charger in DC socket till the LED indicator turns red.
3,The LED indicator will turn green if the battery is charged fully. The mobile phone will show full-power and no LED indicator for charger.
4, Please pull out the charger from DC socket firstly, then the battery&rsquos plug when finish charging.
Welcome OEM and ODM orders
|
Name
|
parameter
|
|
Input
|
Voltage/current
|
DC12V-24V 1A
|
|
Steady current
|
When the input voltage isDC12V&ndash24V, the maximum current is 1A.
|
|
Surge current
|
In cold start, when input 24v in 10uS, the maximum current is less than 1A
|
|
No-load consumption
|
When input 12V/DCor24V/DC, and no output, the input power is less than 1W.
|
|
Maximum power
|
5.0w
|
|
Operating effciency
|
In the range of nominal voltage and full loaded, the operating efficiency&ge 60%
|
|
Output
|
Nominal output voltage
|
DC5.25V
|
|
The range of output voltage
|
DC5.0V-6.5V
|
|
Output current
|
0.2-1A
|
|
Output ripple harmonic
|
&le300mV (As for the test circuit, please take the drawing as reference.)
|
|
LED lighting
|
when operating, the LED lighting is green
|
|
Delay of nominal output
|
The output will be nominal in 100mS after inputting nominal voltage
|
|
Protective circuit
|
Short-circuit protection, Over-voltage protection, Over-temperature protection
|
|
 |
DP-CC911 |
Desire Power Car charger (DP-CC911) with the following outstanding characteristics:
Features
Appearance:frosted type,UV smooth interface,rubber oil type
applicable model: Nokia/Motorola/Samsung/LG/Palm/HTC(Customized designs are available upon requests.)
It is compatible with all brands mobile phone,PDA,MP3/4,GPS etc.
Function
1.over-current over-voltage, over-load and over-temperature protection.
2.ouput-current vary from products by the intelligent control, will prolong the cycle life.
3.evironmentally friendly, energy-saving, complying with the safe certification standard.
4.hgh working efficiency: over 85%, good charging performance.
5.sronger performance, lower cost.
Parameters
Input voltage and current:12~24V/DC 1A
Output voltage and current:.5.0-6.5V/DC 0.2-1A
low non-load: Less than 0.3mA
Safe Certification
CE FCC CCC RoHS
Usage Guide:
1,Connect the charger with mobile phone till the LED indicator turns green.
2,Plug the charger in DC socket till the LED indicator turns red.
3,The LED indicator will turn green if the battery is charged fully. The mobile phone will show full-power and no LED indicator for charger.
4, Please pull out the charger from DC socket firstly, then the battery&rsquos plug when finish charging.
Welcome OEM and ODM orders
|
Name
|
parameter
|
|
Input
|
Voltage/current
|
DC12V-24V 1A
|
|
Steady current
|
When the input voltage isDC12V&ndash24V, the maximum current is 1A.
|
|
Surge current
|
In cold start, when input 24v in 10uS, the maximum current is less than 1A
|
|
No-load consumption
|
When input 12V/DCor24V/DC, and no output, the input power is less than 1W.
|
|
Maximum power
|
5.0w
|
|
Operating effciency
|
In the range of nominal voltage and full loaded, the operating efficiency&ge 60%
|
|
Output
|
Nominal output voltage
|
DC5.25V
|
|
The range of output voltage
|
DC5.0V-6.5V
|
|
Output current
|
0.2-1A
|
|
Output ripple harmonic
|
&le300mV (As for the test circuit, please take the drawing as reference.)
|
|
LED lighting
|
when operating, the LED lighting is green
|
|
Delay of nominal output
|
The output will be nominal in 100mS after inputting nominal voltage
|
|
Protective circuit
|
Short-circuit protection, Over-voltage protection, Over-temperature protection
|
|
 |
DP-CC905 |
Desire Power Car charger (DP-CC905) with the following outstanding characteristics:
Features
Appearance:frosted type,UV smooth interface,rubber oil type
applicable model: Nokia/Motorola/Samsung/LG/Palm/HTC(Customized designs are available upon requests.)
It is compatible with all brands mobile phone,PDA,MP3/4,GPS etc.
Function
1.over-current over-voltage, over-load and over-temperature protection.
2.ouput-current vary from products by the intelligent control, will prolong the cycle life.
3.evironmentally friendly, energy-saving, complying with the safe certification standard.
4.hgh working efficiency: over 85%, good charging performance.
5.sronger performance, lower cost.
Parameters
Input voltage and current:12~24V/DC 1A
Output voltage and current:.5.0-6.5V/DC 0.2-1A
low non-load: Less than 0.3mA
Safe Certification
CE FCC CCC RoHS
Usage Guide:
1,Connect the charger with mobile phone till the LED indicator turns green.
2,Plug the charger in DC socket till the LED indicator turns red.
3,The LED indicator will turn green if the battery is charged fully. The mobile phone will show full-power and no LED indicator for charger.
4, Please pull out the charger from DC socket firstly, then the battery&rsquos plug when finish charging.
Welcome OEM and ODM orders
|
Name
|
parameter
|
|
Input
|
Voltage/current
|
DC12V-24V 1A
|
|
Steady current
|
When the input voltage isDC12V&ndash24V, the maximum current is 1A.
|
|
Surge current
|
In cold start, when input 24v in 10uS, the maximum current is less than 1A
|
|
No-load consumption
|
When input 12V/DCor24V/DC, and no output, the input power is less than 1W.
|
|
Maximum power
|
5.0w
|
|
Operating effciency
|
In the range of nominal voltage and full loaded, the operating efficiency&ge 60%
|
|
Output
|
Nominal output voltage
|
DC5.25V
|
|
The range of output voltage
|
DC5.0V-6.5V
|
|
Output current
|
0.2-1A
|
|
Output ripple harmonic
|
&le300mV (As for the test circuit, please take the drawing as reference.)
|
|
LED lighting
|
when operating, the LED lighting is green
|
|
Delay of nominal output
|
The output will be nominal in 100mS after inputting nominal voltage
|
|
Protective circuit
|
Short-circuit protection, Over-voltage protection, Over-temperature protection
|
|
 |
DP-CC920 |
Desire Power Car charger (DP-CC920) with the following outstanding characteristics:
Features
Appearance:frosted type,UV smooth interface,rubber oil type
applicable model: Nokia/Motorola/Samsung/LG/Palm/HTC(Customized designs are available upon requests.)
It is compatible with all brands mobile phone,PDA,MP3/4,GPS etc.
Function
1.over-current over-voltage, over-load and over-temperature protection.
2.ouput-current vary from products by the intelligent control, will prolong the cycle life.
3.evironmentally friendly, energy-saving, complying with the safe certification standard.
4.hgh working efficiency: over 85%, good charging performance.
5.sronger performance, lower cost.
Parameters
Input voltage and current:12~24V/DC 1A
Output voltage and current:.5.0-6.5V/DC 0.2-1A
low non-load: Less than 0.3mA
Safe Certification
CE FCC CCC RoHS
Usage Guide:
1,Connect the charger with mobile phone till the LED indicator turns green.
2,Plug the charger in DC socket till the LED indicator turns red.
3,The LED indicator will turn green if the battery is charged fully. The mobile phone will show full-power and no LED indicator for charger.
4, Please pull out the charger from DC socket firstly, then the battery&rsquos plug when finish charging.
Welcome OEM and ODM orders
|
Name
|
parameter
|
|
Input
|
Voltage/current
|
DC12V-24V 1A
|
|
Steady current
|
When the input voltage isDC12V&ndash24V, the maximum current is 1A.
|
|
Surge current
|
In cold start, when input 24v in 10uS, the maximum current is less than 1A
|
|
No-load consumption
|
When input 12V/DCor24V/DC, and no output, the input power is less than 1W.
|
|
Maximum power
|
5.0w
|
|
Operating effciency
|
In the range of nominal voltage and full loaded, the operating efficiency&ge 60%
|
|
Output
|
Nominal output voltage
|
DC5.25V
|
|
The range of output voltage
|
DC5.0V-6.5V
|
|
Output current
|
0.2-1A
|
|
Output ripple harmonic
|
&le300mV (As for the test circuit, please take the drawing as reference.)
|
|
LED lighting
|
when operating, the LED lighting is green
|
|
Delay of nominal output
|
The output will be nominal in 100mS after inputting nominal voltage
|
|
Protective circuit
|
Short-circuit protection, Over-voltage protection, Over-temperature protection
|
|
 |
2 in 1 |
Desire Power charger (2 in 1) with the following outstanding characteristics:
Features
Appearance:frosted type,UV smooth interface,rubber oil type
applicable model: Nokia/Motorola/Samsung/LG/Palm/HTC(Customized designs are available upon requests.)
It is compatible with all brands mobile phone,PDA,MP3/4,GPS etc.
Function
1.over-current over-voltage, over-load and over-temperature protection.
2.ouput-current vary from products by the intelligent control, will prolong the cycle life.
3.evironmentally friendly, energy-saving, complying with the safe certification standard.
4.hgh working efficiency: over 85%, good charging performance.
5.sronger performance, lower cost.
Parameters
Input voltage and current:12~24V/DC 1A
Output voltage and current:.5.0-6.5V/DC 0.2-1A
low non-load: Less than 0.3mA
Safe Certification
CE FCC CCC RoHS
Usage Guide:
1,Connect the charger with mobile phone till the LED indicator turns green.
2,Plug the charger in DC socket till the LED indicator turns red.
3,The LED indicator will turn green if the battery is charged fully. The mobile phone will show full-power and no LED indicator for charger.
4, Please pull out the charger from DC socket firstly, then the battery&rsquos plug when finish charging.
Welcome OEM and ODM orders
|
Name
|
parameter
|
|
Input
|
Voltage/current
|
DC12V-24V 1A
|
|
Steady current
|
When the input voltage isDC12V&ndash24V, the maximum current is 1A.
|
|
Surge current
|
In cold start, when input 24v in 10uS, the maximum current is less than 1A
|
|
No-load consumption
|
When input 12V/DCor24V/DC, and no output, the input power is less than 1W.
|
|
Maximum power
|
5.0w
|
|
Operating effciency
|
In the range of nominal voltage and full loaded, the operating efficiency&ge 60%
|
|
Output
|
Nominal output voltage
|
DC5.25V
|
|
The range of output voltage
|
DC5.0V-6.5V
|
|
Output current
|
0.2-1A
|
|
Output ripple harmonic
|
&le300mV (As for the test circuit, please take the drawing as reference.)
|
|
LED lighting
|
when operating, the LED lighting is green
|
|
Delay of nominal output
|
The output will be nominal in 100mS after inputting nominal voltage
|
|
Protective circuit
|
Short-circuit protection, Over-voltage protection, Over-temperature protection
|
|
|
