Your location : Home >> FAQ
V6 series lipo battery User Manual

V6  series lipo battery User Manual

Typical Features:

*Lower IR with higher MPV

*Higher energy density with lower weight

*Longer life cycle under proper usage up to 200 times

*Can be charged with 5C+ when time is critical; Recommended charge with 1-2C

Thank you for choosing the products manufactured by DESIRE POWER Co.Ltd. Before using the product, please read and follow the below instructions and safety precautions carefully.


Users should contact DESIRE POWER first if they need use the battery in the circumstances which are not stipulated in the documents, because we need conduct specific test to verify the performance and security of the battery under that very condition. Otherwise, DESIRE POWER and his distributors/dealers will assume no liability for failures to comply with these instructions and safety precautions.


1.1 First charge

When you receive the battery, please do not use it directly, but to fully charge it first with the specific Lipo balance-charger.

1.2 Charger

Use specific Lipo balance-charger only. Other types of charger are not recommended to charge our batteries. 

1.3 Charging Current

Never charge batteries with current over the maximum charging current which was regulated by specifications (1-2C in general), strongly recommended should not exceed 5C. Higher setting may lead to charging insufficiency, inferior in performance, heating and even leakage. 

1.4 Charging Voltage

Charging Voltage should be controlled around 4.20V and under any condition should not beyond the regulated limit voltage (4.25V/cell). As for battery pack in series, please choose balance charging or charge each cell respectively. Series charging is not recommended. If the charging voltage is too high or you choose series charging, over-charge may occur. All these may result in battery swelling, heating or even leakage, severely deteriorating batteries’ performance and cycle life.

1.5 Charging Temperature

Batteries must be charged at a place within the temperature ranged from 15℃ to 35℃, or it may lead to the reduction of charging &discharging efficiency, charging insufficiency.

1.6 Reverse charging is prohibited

Please correctly connect the positive (+) and negative (-) electrode of the battery, and strictly avoid reverse charging. Otherwise, the battery would not be chargeable. Meanwhile, reverse charging will reduce the charging& discharging performance and security of the battery, even result in heating or leakage.

1.7 Disposal of abnormal phenomena while charging

If there’s any abnormal condition occurs during the charging process, please discontinue the charging process immediately and consult relevant professionals for disposal.

Prev : No information!
Next : No information!
HOMEProductsFAQCertificationAbout usContact us

Copyright@2001-2011 Desire Power International Group Co.,Ltd.
Without permissin | Forbidden copying